Get a Quote

Knowledge Base

Answers to your most common questions

199 questions in 6 categories for 4 product series

Maintenance 31 questions

Yes. The DragLab Water Bath Series allows temperature calibration using a certified reference thermometer when required by laboratory quality procedures.

Calibration helps compensate for small measurement deviations and ensures that displayed temperatures remain consistent with the laboratory's reference standards. Laboratories operating under quality management systems or regulated environments should perform calibration at intervals specified by their internal procedures.

If high measurement accuracy is required, calibration should always be carried out after the bath has reached thermal equilibrium and using a certified temperature reference.

The cleaning frequency depends on the quality of the feed water, particularly its hardness, and how frequently the system is used. In areas with hard water, mineral deposits may build up more quickly, requiring more frequent cleaning and descaling. Regular maintenance helps maintain efficient operation, consistent distilled water quality, and extends the service life of the equipment. For best performance, DragLab recommends following the cleaning and maintenance intervals provided in the user manual.

Yes. The DragLab Drying Oven Series includes a temperature calibration function that allows users to compensate for minor temperature deviations by entering a correction value through the controller when calibration is required.

This feature helps improve the agreement between the displayed chamber temperature and a calibrated external reference thermometer, supporting greater measurement accuracy for applications where precise temperature control is important. Temperature calibration is particularly useful after periodic maintenance, during routine quality assurance procedures, or when compliance with laboratory calibration protocols is required.

The calibration adjustment is performed through the controller interface and enables users to fine-tune the displayed temperature without affecting the oven's overall operating functions. For the most reliable results, DragLab recommends performing calibration using a certified reference thermometer under stable operating conditions and in accordance with the laboratory's internal calibration procedures.

Descaling is essential for maintaining the efficiency and long-term performance of DragLab Water Still systems. Over time, minerals naturally present in feed water can accumulate inside the boiling chamber and on the heating element, reducing heat transfer efficiency and lowering distilled water production. Regular descaling removes these deposits, helps maintain consistent water quality and production capacity, reduces energy consumption, and extends the service life of the equipment.

The recommended calibration interval depends on laboratory quality requirements, regulatory standards, and frequency of use.

For routine laboratory applications, calibration should be performed periodically as part of the laboratory's preventive maintenance program. Laboratories operating under accredited quality systems or regulated environments typically verify calibration annually or according to their documented quality procedures.

Regular calibration helps ensure reliable temperature control, improves measurement confidence, and supports consistent laboratory results throughout the service life of the equipment.

Scale buildup can be minimized by using the supplied pre-filter, maintaining a continuous feed water supply, and following the recommended cleaning and descaling schedule in the user manual. The pre-filter helps reduce suspended particles and impurities in the feed water, contributing to more efficient operation and easier maintenance. Regular inspection of the boiling chamber and heating element also helps prevent excessive mineral deposits, ensuring consistent distilled water production and extending the service life of your DragLab Water Still.

To maintain reliable performance, DragLab Water Still systems should be inspected regularly. Key components include the heating element, boiling chamber, water level control system, condenser, water inlet and outlet tubing, electrical connections, and seals. Routine inspection and preventive maintenance help ensure consistent distilled water production, improve operational efficiency, reduce unexpected downtime, and extend the service life of the equipment.

To maximize the service life of your DragLab Water Still, follow the recommended operating and maintenance procedures provided in the user manual. Regular cleaning, timely descaling, routine inspection of key components, and the use of suitable feed water help maintain efficient operation and consistent distilled water quality. Preventive maintenance not only reduces unexpected downtime but also extends the lifespan of the heating system and other critical components, ensuring reliable long-term performance.

Before cleaning the DragLab Drying Oven Series, switch off the oven, disconnect it from the power supply, and allow it to cool completely. The AISI 304 stainless steel chamber, shelves, and interior surfaces should be cleaned using a soft, lint-free cloth and a suitable non-corrosive, non-abrasive cleaning agent to remove dust, residues, or other contaminants.

Avoid using steel wool, abrasive pads, strong acids, alkalis, or aggressive solvents that could damage the stainless-steel surfaces or protective finishes. During cleaning, take care to prevent water or cleaning liquids from entering the controller, electrical components, or ventilation openings. After cleaning, ensure that all surfaces are completely dry before reconnecting the oven to the power supply and resuming operation.

Regular cleaning helps maintain a hygienic working environment, minimizes the risk of sample contamination, and contributes to the reliable long-term performance of the oven.

If the water level falls below the safe operating level, the DragLab Water Bath Series is equipped with a low-water protection system that helps protect the heating system from damage caused by insufficient water.

To prevent interruption of laboratory work, users should routinely monitor the water level during extended heating cycles, particularly when operating at elevated temperatures where evaporation is greater. Replenishing the bath with distilled water whenever necessary helps maintain stable operating conditions and prolongs the service life of the equipment.

If low-water protection has been activated, refill the bath to the recommended operating level before restarting normal operation.

No. Water or other cleaning liquids should never be sprayed directly onto the DragLab Drying Oven Series. Moisture entering the controller, electrical components, or ventilation openings may create electrical hazards, cause equipment damage, and affect the oven's safe and reliable operation.

Instead, disconnect the oven from the power supply, allow it to cool completely, and clean the interior and exterior surfaces using a soft cloth lightly dampened with a suitable non-corrosive cleaning agent. After cleaning, ensure that all surfaces are completely dry before reconnecting the oven to the power supply and returning it to service.

DragLab recommends performing preventive maintenance at least once per year to ensure safe operation, maintain optimum heating performance, and extend the service life of the oven. Regular maintenance helps verify that key components, such as the heating system, air circulation system, temperature sensor, door seal, and electrical connections, are functioning correctly.

In laboratories where the oven is used continuously or under demanding operating conditions, more frequent inspections may be appropriate. Routine preventive maintenance can help identify potential issues before they affect performance, reduce unexpected downtime, and ensure reliable and consistent operation throughout the oven's service life.

Regular cleaning is essential to maintain hygienic operating conditions, ensure reliable temperature performance, and extend the service life of the DragLab Water Bath Series.

Before cleaning, switch off the water bath, disconnect it from the power supply, and allow the water and all internal components to cool to a safe temperature. Drain the bath completely using the integrated drain valve, then clean the stainless-steel chamber, lid, and accessible internal surfaces with a soft cloth or sponge and a suitable non-corrosive, non-abrasive cleaning agent.

Do not use steel wool, abrasive pads, aggressive acids, strong alkalis, or metal tools that may damage the stainless-steel surfaces. Water should never be sprayed directly onto the control panel or electrical components, and all surfaces should be completely dry before the bath is returned to service.

Routine cleaning helps prevent residue buildup, minimizes contamination, and supports consistent long-term performance.

No. The door gasket should only be replaced after the DragLab Drying Oven Series has been switched off, disconnected from the power supply, and allowed to cool completely. Replacing the gasket while the oven is still hot may damage the sealing material, reduce its sealing performance, or increase the risk of personal injury.

Before installing a new gasket, ensure that the gasket groove and door sealing surface are clean and free of debris. Correct installation of the gasket helps maintain an effective door seal, minimizes heat loss, and supports stable chamber temperatures and reliable heating performance.

The water should be replaced regularly to maintain clean operating conditions and reduce the risk of contamination.

For routine laboratory applications, DragLab recommends changing the water at least once each week, or more frequently if the bath is heavily used, operated at elevated temperatures, or visibly contaminated. Laboratories working with biological samples or microbiological materials may require more frequent water replacement according to their internal quality procedures.

Fresh distilled water helps maintain heating efficiency, reduces scale formation, and minimizes microbial growth inside the bath.

Warm water naturally provides favorable conditions for the growth of bacteria, algae, fungi, and biofilm if the bath is not properly maintained. Preventing contamination requires good laboratory practice rather than relying on the equipment alone.

To minimize contamination:

  • Replace the water regularly.
  • Use clean distilled water.
  • Keep the stainless-steel lid in place whenever possible to reduce airborne contamination.
  • Clean the chamber routinely.
  • Remove spills and sample residues immediately.
  • Empty and dry the bath if it will not be used for an extended period.
  • Where permitted by laboratory procedures, use an appropriate water bath treatment or disinfectant recommended for laboratory water baths.

Following these practices helps maintain hygienic conditions, improves reliability, and reduces the likelihood of contamination affecting laboratory samples.

Scale is caused by minerals, primarily calcium and magnesium, that are naturally present in tap water. As the water is heated, these minerals gradually deposit on the heating surfaces and stainless-steel chamber.

Scale buildup reduces heating efficiency, creates localized hot spots, increases energy consumption, and may shorten the service life of the heating system if left untreated.

Using distilled water instead of tap water is the most effective way to minimize scale formation. Regular cleaning and periodic descaling also help maintain optimum heating performance and prolong equipment life.

If mineral deposits become visible inside the bath, they should be removed promptly to maintain efficient heat transfer.

After disconnecting the water bath from the power supply and allowing it to cool, drain the bath completely and clean the chamber using a soft cloth together with a suitable laboratory descaling solution compatible with stainless steel. After descaling, rinse the bath thoroughly with clean water before refilling it with fresh distilled water.

Regular descaling helps maintain efficient heating, reduces stress on the heating system, and preserves accurate temperature control throughout the service life of the equipment.

The calibration interval for the DragLab Incubator Series depends on the laboratory's quality management system, applicable regulatory requirements, and the frequency of use. Laboratories operating under accredited quality systems should establish a calibration schedule that complies with their internal procedures and relevant standards.

To help ensure continued measurement accuracy, calibration should be performed using a certified reference standard. A calibration certificate is available for the DragLab Incubator Series as an optional accessory.

Yes. Suitable laboratory disinfectants may be used as part of routine cleaning and contamination control, provided they are compatible with stainless-steel laboratory equipment and are used according to the disinfectant manufacturer's instructions.

Strong oxidizing chemicals, highly corrosive disinfectants, or products that may attack stainless steel should be avoided. After disinfection, the chamber should be thoroughly rinsed with clean water to remove any remaining chemical residues before the bath is returned to normal operation.

Yes. The DragLab Incubator Series includes a temperature calibration function that can be accessed through the controller menu. This feature allows temperature calibration to help maintain accurate temperature control when performed according to the operating instructions.

For reliable results, temperature calibration should be carried out using an appropriate certified reference thermometer and in accordance with the laboratory's quality procedures.

Routine inspection helps ensure safe operation and reliable temperature performance.

Users should periodically inspect:

  • Stainless-steel bath chamber
  • Stainless-steel lid
  • Heating area
  • Water level
  • Drain valve
  • Temperature sensor area
  • Power cord and electrical plug
  • Control panel and display
  • Exterior housing

The bath should also be checked for signs of scale, contamination, corrosion, leaks, or abnormal operating conditions. Addressing minor issues early helps reduce unexpected downtime and prolongs equipment life.

Yes. DragLab is committed to providing reliable after-sales support through its authorized distributors and service partners. Customers can receive assistance with installation guidance, operation, maintenance, troubleshooting, spare parts, and technical support to help ensure reliable long-term performance of their DragLab Water Still system. For service requests, customers should contact their local DragLab distributor or sales representative.

DragLab recommends performing preventive maintenance at least once per year to verify that the heating system, circulation pump, temperature controller, safety devices, and electrical components continue to operate correctly.

Laboratories operating continuously or under demanding conditions may choose to perform inspections more frequently as part of their preventive maintenance program. Regular maintenance helps improve reliability, reduce unexpected downtime, and maintain consistent laboratory performance.

The service life of the water bath can be significantly extended through proper operation and routine maintenance.

For optimum long-term performance, DragLab recommends:

  • Using distilled water whenever possible.
  • Maintaining the correct water level.
  • Replacing the water regularly.
  • Cleaning the chamber routinely.
  • Removing scale deposits before they become excessive.
  • Keeping the lid closed during normal operation.
  • Avoiding prolonged operation with insufficient water.
  • Performing periodic calibration and preventive maintenance.
  • Using the equipment only within its specified operating conditions.

Following these recommendations helps maintain heating efficiency, preserve temperature accuracy, reduce maintenance requirements, and ensure reliable laboratory operation throughout the life of the equipment.

The DragLab Incubator Series is designed for easy cleaning and maintenance. Its chamber is constructed from smooth AISI 304 stainless steel, providing excellent durability and a surface that is easy to keep clean.

For routine cleaning:

  • Always disconnect the incubator from the power supply before performing any cleaning or maintenance.
  • Clean the chamber, shelves, and inner tempered glass door regularly to maintain hygienic operating conditions and reliable performance.
  • Wipe surfaces with a soft, damp cloth. If required, alcohol-based cleaning agents may be used.
  • Do not use acidic, chlorine-based, or other corrosive cleaning agents, as they may damage the stainless-steel surfaces and other components.

Regular cleaning helps maintain a clean incubation environment and supports the long-term performance of the DragLab Incubator Series.

The DragLab Incubator Series should undergo preventive maintenance at least once per year to help ensure reliable operation and long-term performance.

Maintenance should be performed by authorized and qualified service personnel in accordance with the operating manual. In addition to scheduled annual maintenance, users should keep the incubator clean and regularly inspect it for any signs of damage or abnormal operation. If any faults or alarms occur, discontinue operation and contact your authorized DragLab distributor or technical support.

Yes. The DragLab Incubator Series chamber may be cleaned using alcohol-based disinfectants or cleaning agents as part of routine maintenance.

However, acidic, chlorine-based, or other corrosive cleaning agents must not be used, as they may damage the AISI 304 stainless steel chamber and other components.

Before cleaning or disinfecting the chamber, always disconnect the incubator from the power supply and follow the operating manual and your laboratory's cleaning procedures.

No. The DragLab Incubator Series does not include a dedicated chamber disinfection or sterilization function.

To maintain hygienic operating conditions, the chamber should be cleaned regularly using appropriate cleaning agents in accordance with the operating manual. The AISI 304 stainless steel chamber, removable shelves, and inner tempered safety glass door are designed for easy cleaning.

For routine cleaning, alcohol-based cleaning agents may be used, while acidic, chlorine-based, or other corrosive cleaning agents must not be used. Always disconnect the incubator from the power supply before performing any cleaning or maintenance procedures.

To help ensure reliable operation and long service life, the following components of the DragLab Incubator Series should be inspected regularly:

  • Chamber interior to ensure it remains clean and free from contamination.
  • Chrome-plated wire shelves for cleanliness, proper installation, and signs of damage.
  • Inner tempered safety glass door for cleanliness and integrity.
  • Door gasket (seal) to ensure proper sealing and minimize heat loss.
  • Power cord and electrical connections for any signs of wear or damage.
  • General operating condition of the incubator, including normal temperature control and alarm status.

In addition, periodic calibration and verification of temperature performance are recommended whenever required by the laboratory's quality management system or standard operating procedures. Preventive maintenance should be performed at least once per year by authorized and qualified service personnel.

To maximize the service life of the DragLab Incubator Series, install the incubator according to the recommended clearances, operate it within the specified ambient conditions, clean the chamber regularly, avoid exceeding the permitted shelf and chamber loads, and perform routine inspection and calibration when required. Following the operating instructions and preventive maintenance practices helps ensure long-term, reliable performance.

Planning a purchase?

Send us your request. We will prepare a quote and help you choose the right device.

+49 6196 400816 info@drag-lab.de