Get a Quote

Knowledge Base

Answers to your most common questions

199 questions in 6 categories for 4 product series

Installation 7 questions

All models in the DragLab Drying Oven Series, including both the Digital Display (DO Series) and Touch Screen (TO Series), are supplied with two chrome-plated steel shelves as standard, providing immediate flexibility for a wide range of laboratory heating and drying applications.

Depending on the selected model, additional shelf positions are available to maximize chamber capacity and improve batch throughput:

Model

Standard Shelves

Maximum Shelf Positions

DO 30 / TO 30

2

5

DO 55 / TO 55

2

8

DO 80 / TO 80

2

10

DO 120 / TO 120

2

11

The ability to accommodate multiple shelf positions allows laboratories to process larger batches in a single heating cycle, improving productivity and making efficient use of the available chamber space. Each shelf is designed to support laboratory samples, glassware, and other compatible materials while maintaining adequate airflow throughout the chamber for consistent heating performance.

The DragLab Drying Oven Series is designed to operate on a 230 V AC, 50/60 Hz single-phase power supply, making it suitable for standard laboratory electrical installations in many regions. Before installation and initial operation, users should verify that the available mains supply matches the voltage and frequency specified on the equipment nameplate.

For safe and reliable operation, the oven should be connected to a properly grounded electrical outlet that complies with local electrical regulations. Using the correct power supply helps ensure stable heating performance, accurate temperature control, and the reliable operation of the programmable PID controller and other electrical components.

Before connecting the oven to the mains, users should also inspect the power cable for any signs of damage and ensure that the electrical installation is capable of supporting the power requirements of the selected model. Following these recommendations helps protect both the equipment and laboratory personnel while ensuring optimum performance throughout the oven's service life.

Before installing the DragLab Drying Oven Series, the oven should be placed on a stable, level, and heat-resistant surface in a clean, dry, and well-ventilated laboratory environment. Adequate clearance should be maintained around the unit to ensure proper air circulation, efficient heat dissipation, and easy access for routine operation and maintenance.

Before connecting the oven to the mains supply, users should verify that the voltage and frequency of the electrical supply match the values specified on the equipment nameplate and that the unit is connected to a properly grounded electrical outlet. It is also recommended to install the oven away from direct sunlight, sources of excessive heat or moisture, and areas containing flammable or explosive materials to ensure safe, reliable, and long-term operation.

To ensure proper ventilation, efficient heat dissipation, and reliable long-term performance, DragLab recommends maintaining the following minimum installation clearances around the oven:

·         Rear: 15 cm (5.9 in)

·         Left and right sides: 5 cm (2.0 in) each

·         Top: 20 cm (7.9 in)

Maintaining these minimum clearances allows unrestricted airflow around the oven, helping to prevent excessive heat buildup and ensuring stable operating conditions. Adequate spacing also provides convenient access for routine inspection, cleaning, and maintenance while contributing to the safe and efficient operation of the equipment.

Yes. Most models in the DragLab Drying Oven Series are designed for bench-top laboratory installation when placed on a stable, level, and heat-resistant surface capable of supporting the oven and its maximum operating load. The DO 30 / TO 30, DO 55 / TO 55, and DO 80 / TO 80 models are suitable for installation on standard laboratory benches, making them ideal for laboratories with limited space.

The larger DO 120 / TO 120 models are intended as floor-standing units due to their larger chamber capacity and overall dimensions. Regardless of the model, users should maintain the recommended installation clearances to ensure adequate ventilation, proper heat dissipation, and safe, reliable operation. Proper installation also helps maintain consistent heating performance and provides convenient access for routine operation and maintenance.

For reliable performance, the DragLab Drying Oven Series should be operated in an environment with:

  • Ambient temperature: +5°C to +55°C
  • Relative humidity: Maximum 80% RH

Operating outside these conditions may affect performance and equipment reliability.

The DragLab Drying Oven Series is supplied with the essential components required for installation and normal laboratory operation. The standard package typically includes:

·         DragLab Drying Oven (selected model)

·         Power cable

·         Two chrome-plated steel shelves

·         Operating manual

·         Service manual

Depending on the model, configuration, or customer requirements, a range of optional accessories may also be available to enhance functionality and accommodate different laboratory applications. These may include:

·         Additional chrome-plated steel shelves

·         Shelf support rails

·         Replacement door gasket

·         Replacement temperature sensor

·         Spare fuses

·         Calibration and validation services (where available)

·         Other genuine DragLab spare parts and accessories

The supplied accessories and optional components may vary according to the selected model, regional requirements, or customer specifications. Using genuine DragLab accessories and replacement parts helps ensure optimum performance, reliable operation, and long-term equipment durability.

Planning a purchase?

Send us your request. We will prepare a quote and help you choose the right device.

+49 6196 400816 info@drag-lab.de