Knowledge Base
Answers to your most common questions
199 questions in 6 categories for 4 product series
General 24 questions
The DragLab Water Still Series is a range of laboratory water distillation systems designed to produce high-quality distilled water for research, clinical, educational, pharmaceutical, and industrial laboratories. The series includes multiple models such as (DS 2000, DS 4000, DS 8000, DS 8008, DS 8012 and DS 8025) with different production capacities to meet various laboratory requirements.
DragLab Water Still systems purify water through a single distillation process. Feed water is heated in a stainless-steel boiling chamber until it turns into steam. The steam then passes through an efficient condenser, where it cools and condenses into high-quality distilled water. During this process, most dissolved salts, minerals, microorganisms, and other contaminants remain in the boiling chamber and are separated from the purified water. This simple and reliable process enables DragLab Water Still systems to consistently produce distilled water suitable for a wide range of laboratory applications.
The DragLab Water Still Series is designed to produce high-quality distilled water for a wide range of laboratory applications. It is ideal for reagent and media preparation, glassware rinsing, microbiology and analytical testing, instrument feeding, and sample preparation. The series is widely used in research laboratories, universities, hospitals, pharmaceutical and biotechnology facilities, environmental laboratories, and industrial quality control laboratories where a reliable supply of distilled water is essential.
The DragLab Water Still Series is suitable for a wide range of laboratories requiring a reliable supply of distilled water. It is commonly used in universities, research institutes, hospitals, pharmaceutical and biotechnology laboratories, food and beverage testing laboratories, environmental laboratories, and industrial quality control facilities. With multiple production capacities available, the series can support the needs of both small research laboratories and large centralized laboratory operations.
Tap water contains dissolved minerals, salts, microorganisms, and other impurities that may affect experimental accuracy, contaminate samples, or cause scale buildup in laboratory equipment. DragLab Water Still systems produce high-quality distilled water with a typical conductivity of approximately 2.3 µS/cm at 25°C, providing a reliable water source for routine laboratory applications. By using distilled water, laboratories can improve the consistency of test results, reduce contamination risks, protect sensitive instruments, and extend the service life of laboratory equipment.
DragLab Water Still systems are designed to produce high-quality distilled water with a typical conductivity of approximately 2.3 µS/cm at 25°C, making it suitable for a wide range of laboratory applications, including reagent preparation, glassware rinsing, media preparation, and general laboratory use. The final water quality may vary depending on feed water quality, operating conditions, and proper system maintenance.
Yes. The quality of the feed water can affect the efficiency, maintenance frequency, and long-term performance of DragLab Water Still systems. Hard water with high mineral content may lead to faster scale buildup inside the boiling chamber and heating element, increasing the need for periodic cleaning and descaling. Following the recommended maintenance schedule and using clean feed water whenever possible helps ensure consistent distilled water quality, reliable operation, and a longer service life.
Yes. DragLab Water Still systems are designed for reliable continuous operation, making them suitable for laboratories with daily or high-volume distilled water requirements. Automatic control features, including water level and safety protection systems, help maintain stable distilled water production while minimizing manual intervention. When installed correctly and maintained according to the user manual, DragLab Water Still systems provide dependable performance for routine laboratory operations in research, clinical, pharmaceutical, and industrial environments.
Choose your DragLab Water Still based on your daily distilled water demand. The series offers capacities from 2 L/h to 25 L/h to suit laboratories of all sizes.
- DS 2000 (2 L/h): Ideal for teaching, research, and small laboratories with low daily water consumption.
- DS 4000 (4 L/h): A versatile choice for universities, QC laboratories, and routine laboratory applications requiring a balance of capacity and efficiency.
- DS 8000 (8 L/h): Designed for medium-sized laboratories with continuous distilled water demand, including pharmaceutical, biotechnology, and industrial QC laboratories.
- DS 8008 (8 L/h): Ideal for laboratories requiring continuous water production with integrated distilled water storage for added convenience.
- DS 8012 (12 L/h): Recommended for hospitals and central laboratories requiring a higher daily distilled water output.
- DS 8025 (25 L/h): Best suited for large laboratories, industrial facilities, and centralized water supply applications with high-volume production needs.
If you are unsure which model is right for your laboratory, the DragLab team can help you select the most suitable solution based on your application and daily water consumption.
DragLab Water Still systems are equipped with multiple safety features to ensure reliable and secure laboratory operation. Depending on the model, these include automatic low water level protection, over-temperature protection, and automatic shut-off to help prevent damage caused by insufficient water supply or overheating. These integrated safety systems protect both the equipment and the user while supporting stable, unattended operation during routine laboratory use.
If the feed water supply is interrupted, DragLab Water Still systems are designed to automatically activate their built-in protection features to help prevent overheating and protect the heating element from damage. Once a normal water supply is restored, the system can resume safe operation according to the model specifications and operating conditions. This protection helps ensure reliable performance while reducing the risk of equipment damage and unexpected downtime.
Yes. DragLab Water Still systems are designed to support reliable unattended operation during normal laboratory use. Automatic water level control and integrated safety protection help maintain stable distilled water production while reducing the need for continuous operator supervision. For safe and optimal performance, the system should always be installed, operated, and maintained according to the user manual and laboratory safety procedures.
Yes. Distilled water produced by a DragLab Water Still can be used as feed water for additional laboratory water purification systems, such as deionization (DI) or ultrapure water systems, when higher water purity is required. Using distilled water as a pre-treatment source helps reduce the load on downstream purification systems, extends the service life of purification cartridges or resins, and contributes to the consistent production of high-purity laboratory water for specialized analytical and research applications.
A DragLab Water Still purifies water through the distillation process, while an RO (Reverse Osmosis) system uses a semi-permeable membrane to remove dissolved contaminants. Distillation effectively removes a broad range of impurities, including most dissolved minerals, microorganisms, and many organic contaminants, producing high-quality distilled water for routine laboratory applications. RO systems are often preferred where lower operating costs or larger volumes of purified water are required. The most suitable solution depends on your laboratory application, required water quality, daily water consumption, and operating requirements.
Distillation is highly effective at removing microorganisms and many impurities from water. Under normal operating conditions, the DragLab Water Still Series produces high-quality distilled water suitable for a wide range of routine laboratory applications. However, if water that is certified bacteria-free, pyrogen-free, or endotoxin-free is required for highly specialized applications, additional validated purification or sterilization processes may be necessary, depending on the specific laboratory requirements.
The DragLab Water Still Series is designed to produce high-quality distilled water for a wide range of laboratory applications. However, compliance with specific pharmacopoeia standards, such as the European Pharmacopoeia (Ph. Eur.), United States Pharmacopeia (USP), or other regulatory requirements, depends on the complete water purification and quality control process. Laboratories should verify that the produced water meets the applicable pharmacopoeial specifications for their intended application.
The DragLab Water Still Series is designed for reliable day-to-day laboratory operation. During use, the unit generates normal operating sounds associated with water heating, boiling, condensation, and water flow. Under normal operating conditions, the noise level is suitable for typical laboratory environments and should not interfere with routine laboratory work. If unusual or excessive noise is observed, the system should be inspected to ensure it is installed correctly and operating according to the user manual.
Feed water consumption varies by model and distilled water output. The typical feed water consumption for the DragLab Water Still Series is:
- DS2000: 40 L/h
- DS4000: 40 L/h
- DS8000: 40 L/h
- DS8008: 80 L/h
- DS8012: 135 L/h
- DS8025: 250 L/h
These values are specified under normal operating conditions. Please refer to the product datasheet for detailed technical specifications and installation requirements.
Power consumption varies depending on the model and distilled water production capacity. The rated power consumption for the DragLab Water Still Series is:
- DS2000: 2000 Watt
- DS4000: 3000 Watt
- DS8000: 3000 Watt
- DS8008: 6000 Watt
- DS8012: 9000 Watt
- DS8025: 18000 Watt
Each model is designed to provide efficient and reliable distilled water production while maintaining consistent laboratory performance. For complete electrical requirements, including voltage and current ratings, please refer to the product datasheet.
Yes. The high-quality distilled water produced by the DragLab Water Still Series is suitable for a wide range of laboratory applications, including reagent preparation, glassware rinsing, media preparation, instrument feeding, and general laboratory use. For applications requiring ultrapure, pyrogen-free, or pharmacopoeia-grade water, additional purification or validation may be required.
Yes. The cooling water discharged from the DragLab Water Still Series can often be reused for non-critical applications, depending on local laboratory practices and water quality requirements. For example, it may be used for general cleaning, irrigation, or other utility purposes, helping to reduce overall water consumption. The suitability of reuse should be evaluated according to local regulations and the intended application.
The distilled water produced by the DragLab Water Still Series is typically discharged at a temperature of approximately 40–50°C under normal operating conditions. Because the water may still be hot immediately after the distillation process, users should handle it with care to avoid the risk of burns. If cooler water is required for a specific application, allow the distilled water to cool before use or transfer it to a suitable storage container.
The DragLab Water Still Series is designed to operate with cooling water at a temperature between 10°C and 35°C. Maintaining the cooling water within this recommended range helps ensure efficient steam condensation, stable distilled water production, and reliable overall system performance. For optimum operation, the cooling water supply should also provide adequate flow and a water pressure within the recommended operating range.
Under normal operating conditions, the discharged cooling water (waste water) from the DragLab Water Still Series is typically between 50°C and 65°C. The exact outlet temperature may vary depending on the inlet cooling water temperature, water flow rate, model, and operating conditions. Because the discharged water may be hot, it should be directed to a suitable drain or handled with appropriate care.
Check the spelling, try a different term or choose another category above. Or ask us directly: +49 6196 400816, info@drag-lab.de.
Planning a purchase?
Send us your request. We will prepare a quote and help you choose the right device.