Get a Quote

Knowledge Base

Answers to your most common questions

199 questions in 6 categories for 4 product series

Troubleshooting 5 questions

If the incubator is not heating properly, verify that:

  • The unit is connected to the correct electrical supply.
  • The desired temperature has been set correctly.
  • The incubator is operating within the recommended ambient conditions.
  • The door is fully closed.
  • No alarm or fault indication is present.

If the problem persists, contact your authorized DragLab distributor or technical support.

Temperature instability may occur if the door is opened frequently, the incubator is overloaded, or the recommended installation clearances are not maintained. The DragLab Incubator Series uses a programmable PID controller and an automatically adjustable forced-air circulation system to maintain homogeneous temperature distribution under normal operating conditions. 

Heating time may increase if the chamber is heavily loaded, the door is opened frequently, or the incubator is operated outside the recommended environmental conditions. Maintaining proper installation clearances and minimizing unnecessary door openings help achieve optimum heating performance. 

If the display indicates an error or fault condition, refer to the alarm indication and stop using the incubator if the fault cannot be resolved. The incubator includes an automatic diagnostic system to assist with fault analysis. If the error remains after basic checks, contact your authorized DragLab distributor or technical support.

Technical support and genuine spare parts for the DragLab Incubator Series are available through DragLab's global network of authorized distributors and service partners. DragLab provides worldwide technical support and offers long-term spare parts availability for current and previous product generations to help maintain reliable equipment operation.

Planning a purchase?

Send us your request. We will prepare a quote and help you choose the right device.

+49 6196 400816 info@drag-lab.de