- Company
-
Products
-
Services
- Articles
- Contact
- Request a Quote
-
English
Capacity
Ultra-pure water
| Capacity | 2 litter / hour |
| Consumption | 40 litter / hour |
| Conductivity | Approximately 2,5 µS/cm at 25 C |
| Fully Automatic | Automatic thermostatic power cut-off to protect the heating element in case of low water |
| Fully Automatic | Automatic power activation when the water level reaches the safety line in the evaporator tank to protect the heating element. |
| Water supply | Built-in solenoid valve connection for the evaporator and cooler, with automatic switching on/off based on the water level in the evaporator tank. |
| Internal material | The tank is made of stainless steel (material no. EN 1.4301) |
| Internal material | The condenser (cooler) is made of stainless steel (material no. EN 1.4876). |
| Internal material | The heating element is made of stainless steel (material no. EN 1.4876). |
| External material | The housing is made from galvanized steel and coated with electrostatic powder. |
| Degassing system | The unit includes a top vent for effective degassing, ensuring pyrogen-free, low-gas, and bacteria-free water. |
| Accessing interior | The evaporator is easily accessible for cleaning and maintenance, facilitating efficient cleaning procedures. |
| Installation | All necessary parts and accessories for installation are included. |
| Distillate water withdrawal | Distillate water can be continuously withdrawn by opening the drain tap. |
| Main switch | The main power switch button located on the front of the unit |
| Led light | Two LED lights on the front: a green light indicating standby operation and a red-light indicating faults. |
| Mounting | Suitable for both benchtop and wall mounting. |
| Water | Low water level sensor with automatic power cut-off to protect the heating element. |
| Heating | Overheating cut-off |
| Led light | Red LED alarm indicator for faults & errors |
| Degassing | pyrogen-free, low-gas, and bacteria-free water. |
| Power connection | Power cable with German shock-proof type (Schuko)) plug |
| Water inlet | The cooling water inlet is located on the right-hand side of the unit, with a diameter of 3/4 inch (Ø 19.05 mm). |
| Water pressure range | From 2 bars to 10 bars |
| Water outlet | The cooling water outlet is located on the right-hand side of the unit, with a diameter of 2/5 inch (inner Ø 10 mm). |
| Drainage tap | The drainage tap is located on the right-hand side of the unit, with a diameter of 2/5 inch (inner Ø 10 mm). |
| Distillate water | Distillate water can be continuously withdrawn by opening the drain tap. |
| Power | The main connection cable on the left-hand side of the unit |
| Voltage | 230 volts, 50/60Hz |
| Watt | 2000 watts |
| Customs tariff number | 8419 4090 |
| Packaging Dimension | 53 W X 50 D X 75 H (CM) |
| Net weight | 22 Kg |
| Gross weight carton | 27 Kg |
Download
Become an authorized distributor or request a personalized quote for DragLab laboratory equipment.